Effective November 9th, 2026:

New Trucking Route Around Our Building. View the Route Here

Equipment line-up

Furnace capacities

Different processes require specialized equipment. Across our internal-quench line, atmosphere pit line, nitriding line, and induction hardening units, our shop is equipped to process multi-step heat treat sequences under one roof rather than splitting your project across multiple vendors.

Operational footprint

Process-matched Equipment Built to Keep Jobs Moving

Our plant operates 18 furnaces dedicated to specific thermal processes:

  • Internal-Quench Line: Four atmosphere furnaces for carburizing, through hardening, normalizing, and annealing, backed by eight companion temper furnaces.

  • Atmosphere Pit Line: Pit furnace with water quenching and air-blast quenching, plus large-part tempering.

  • Gas Nitriding & Nitrox Line: Two shared furnaces dedicated to low-distortion gas nitriding and FNC processing.

  • Induction Hardening: Two varying frequency units for selective surface hardening.

"*" indicates required fields

Name*

Equipment Specifications

Work zone dimensions and operating ranges

Real shop capabilities behind our commercial processing services:

Internal-Quench Furnaces

Four units (one at 24” x 36” x 20” 750 lb capacity, one at 30” x 48” x 30” 1,750lb capacity, two at 36” x 48” x 36” 2,500 lb capacity) operating from 1,400°F to 1,750°F with oil quench.

Quench & Temper Pit Furnaces

One 27” dia. x 36” deep unit (1,450°F–1,850°F) for water and air-blast quenching tool steels (A2, D2, H13, 440C). One 50” dia. x 96” deep pit (500°F–1,200°F) for large-part stress relieving and age hardening. Eight companion tempers cover 300°F–1,400°F.

Gas Nitriding & Nitrox Line

One pit furnace (39′ dia. x 76′ deep, 3,000 lb) and one horizontal furnace (36” x 48” x 36”, 3,500 lb) with continuous hydrogen-probe atmosphere Kn control.

Induction Hardening

Two units handling parts up to 12” diameter x 62” long and 500 lb.

Uptime & atmosphere control

Why choose Thermex for process capacity

  • Multi-furnace redundancy for dependable lead times

    Operating two nitriding furnaces and four internal-quench furnaces ensures single-equipment maintenance windows don't stall your production schedule.
  • Single-source processing

    A range of processes and testing under one roof.
  • Process Control backed by in-house lab

    Continuous process monitoring and verification.

Frequently Asked Questions

What are the absolute maximum part dimensions Thermex can handle?

Our largest work zone is our 50″ diameter x 96″ deep pit furnace, primarily used for stress relieving, tempering, and age hardening. For atmosphere hardening or nitriding, maximum dimensions depend on part orientation and racking requirements

Our large pit furnace (50″ diameter x 96″ deep) has a gross load capacity of 2,000 lb. If your part is close to that limit, send us your part weight and print so our shop team can confirm racking and load distribution before quoting.

Furnaces are surveyed and calibrated under our ISO 9001 quality system, on a regular periodic schedule, according to our in-house pyrometry procedure and industry specs. Survey reports are available any time on request.

Yes. We maintain processing and quality records for all jobs, including furnace charts and test reports, and can provide these on short notice to facilitate your quality audits and job reviews.